magnetic stripe card Archives

Common production for Make blank magnetic stripe cards：

1.The magnetic stripe card can be designed according to the materials provided by the customer, or the design draft can be provided by the customer.

2.The thickness of the magnetic stripe card is generally 0.30mm to 0.76mm, 0.76 is the standard thickness, and other thicknesses can be made.

3.The standard size of the magnetic stripe card is 85.5mm*54mm, and it can be made into other sizes.

4.The magnetic stripe card can be printed on one or both sides, using silk or offset printing (CMYK four-color printing) printing method.

5.You can spray different numbers, PIN codes or text on each magnetic stripe card.

6.Magnetic stripe card can be added with the signature strip

7.The magnetic stripe card can make a convex code, and the convex code can be bronzing or hot silver.

8.You can make a circular hole or a strip hole on the magnetic stripe card.

9.The number of the magnetic stripe card can be arranged in order, or a personalized, irregular number can be made.

11.The surface of the magnetic stripe card can be made of matte or glossy.

12.The magnetic stripe card can be made of white PVC material, or it can be made of frosted transparent material or completely transparent material.

Make blank magnetic stripe cards needs to know these：

1.Use the calendar file to place an order, and replace the effect with a bitmap. Words, symbols, and patterns are replaced by curves.

2.The rounded corner of the card is 12 degrees.

3.The distance between the magnetic strip and the inner frame edge of the card is 4mm, and the width of the magnetic strip is 12.6mm.

4.The position of the convex core design cannot be pressed to the magnetic card on the back or the magnetic strip will not be used.

5.The thickness of the line must not be less than 0.076mm, otherwise it will not appear.

Pay attention to the following items before placing an order:

Explain how many cards need to be produced in total, indicating special requirements.
Does the card number need to be bronzing, hot silver or non-hot? Does the back need several signature strips? Does the number “4” or “7” need to be removed?
Since the card printing carrier is different, the printed product and the computer display a certain color difference.

If you need to Make blank magnetic stripe cards, we can serve you. We are a professional wholesale manufacturer of PVC cards. Click here for details.

The production of custom printed PVC cards are not only important for various processes, but also its thickness cannot be ignored. The international standard of bank card is 0.76mm. The thickness commonly used by customers include: 0.15mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.84mm, 0.9mm, etc.

PVC card, just as the name implies, is made of PVC materials. The characteristics of PVC materials are: lightweight, heat insulation, heat preservation, moisture-proof, flame retardant, simple construction, etc.

Common custom printed PVC cards are of 0.76mm thickness, which can be reflected on the card surface no matter what craft you use, such as convex code, spray code, marking code, bronzing gold, silver stamping, labeling, magnetic strip, bar code, laser mark and other personalized craft.

Of course, there will also be thinner than this to make membership card, VIP card, magnetic stripe card, barcode card,ect. But if the thickness is less than 0.5mm (including 0.5mm), some of its craft will not be adopted.

For example, the convex codes cannot be realized on these thicknesses, because the convex codes press numbers on the cards with high impact pressure. If these thicknesses are punched with convex codes, the problem of cracking will be caused.

Therefore, if the custom printed PVC cards are made with a thin process, it cannot be convex. Of course, if the card is too thick, for example, 0.9mm or above, the convex code craft also cannot be adopted.

Other crafts can generally be achieved in any thickness, so when making PVC cards, special attention should be paid to the thickness of cards, and appropriate thickness should be selected according to the functions of the products you want to achieve.

If there is no special customization requirement, CXJ Card Factory adopts the default international standard thickness: 0.76mm thickness to produce your product. custom pvc cards, white pvc cards, cr80 pvc cards, loyalty punch cards, plastic punch cards are allowed at info@cxjcardfactory.com.

PVC Card Manufacturers, Professional Plastic Card Factroy – CXJ Card Factory

The Correct Process For Make Blank Magnetic Stripe Cards

Common production for Make blank magnetic stripe cards：

Make blank magnetic stripe cards needs to know these：

Pay attention to the following items before placing an order:

The thickness craft of PVC card process